User Manual — TeleCorder with UpCorder Software —
V 2.17-B-US
16
f.
Batch Delete a Range of Files:
You can use the
Delete Range To:
button to delete a selection of
recordings between the number listed in the box below the
Delete Range To:
button and the number
listed in the
Item #
box. Deleted recordings cannot be recovered.
6. Using Two, Three, or Four UC-02B or UC-04B with a Single PC
The software CD supplied with your UC-02B and UC-04B supports a maximum of four recorders and
16 channels on one PC. You should first install the software, then connect the first unit and test to confirm
that it is functioning properly by following the instructions in this manual. After the first unit is connected
and tested, repeat the process for any additional UpCorder units.
Note: Each UC-02B or UC-04B requires 150-170mA from the +5V USB power bus. Standard
USB ports are rated at 500mA per port. A maximum of three units should be connected to a single
bus-powered USB hub. If connecting four units to your PC using a USB hub that supports 4 USB
devices (not a self- powered hub, no AC power adapter), connect a maximum of three units to the
non-powered USB hub, and the fourth unit directly to a USB port that is on the PC or on a self-
powered USB hub.
TeleCorders have a
Device ID
that is stored in their internal memory and unique to each unit. This
Device ID
is an aid to keeping track of what sources of conversations are connected to which TeleCorder
and will be displayed when you view the
Configure Software and/or Hardware
window and click on
a particular unit.
Run the UpCorder program by clicking on the icon on your PC desktop that was created when the
program was installed, or from the programs list. After launching the UpCorder software, the
Port
Activity
window will be displayed showing four ports for each UC-02B or UC-04B connected to your PC.
With two channel UC-02B units, you will see the four possible channels, however, only the first two
channels for that unit will be active. The information displayed on the
Port Activity
,
View Log
, and
About
windows is similar to the single unit software. See manual
Section III. Using TeleCorder
.
