background image

                                     

 User  Manual  —  TeleCorder with UpCorder Software  —  

V 2.17-B-US                                  

     20     

MOD-SC — Converts Modular Phone Plug to 3.5mm Mini-Plug 

  

The MOD-SC is used when you have a cable with a standard RJ-11 single-line 

telephone type plug that you need to connect to audio from equipment with 3.5mm mini-
plug jack. It has an RJ-11 jack on one end and a 3.5mm monaural mini-plug on the other 
end.  
     The MOD-SC is typically used to connect modular telephone line cables used with 
audio recorders to the audio output of a radio receiver that uses a 3.5mm jack for speaker 
or line level audio output.

 

 

MTJ-S2 — Converts a 2-Line RJ-14 Modular Telephone Jack into 
Separate RJ-11 Single Line Jacks 

  

This adapter/cable assembly splits a 2-line RJ-14 circuit/jack into two 

RJ-11 jacks (Line-1 on left and Line-2 on right). It is typically used with the two 
line jacks on the TeleCorder and other Voice Logging Recorders that have two 
inputs on a single modular jack (RJ-14, 6P4C). 

 

PZ-2LA — Pressure Zone Room Monitoring Microphone with Line Level Output 

  

The Omnicron PZ-2LA Microphones are Pressure Zone Microphones designed for meeting and 

conference recording. They look like a switch, not a microphone, so as not to draw attention. 
           Like other Pressure Zone Microphones, they use a 
miniature microphone capsule mounted near a sound reflecting 
plate. In this zone, direct sound from the source combines in 
phase at all frequencies with reflected sound. The benefits are 
many: 6 dB more sensitivity, 6 dB less noise, a wide smooth 
frequency response free of phase interference, excellent clarity, 
and consistent pickup anywhere around the microphone. A 
built-in amplifier provides a high level output. Power for the 
amplifier in the PZ-2LA is provided by an AC power adapter 
which is supplied with the PZ-2LA microphone. The PZ-2LA 
comes with a cable for connecting to the RJ-11 jack on the 
TeleCorder digital audio recorders. If the microphone is located 
more than 25' from your recorder, standard RJ-11 telephone 
extension cables can be used. One twenty-five foot (25') 
extension cable is supplied with each PZ-2LA. 

 
 
 

VIII.   Contact Information for Support and Service

 

 

Manufactured in China by: Beijing ChangXing., Co., Ltd., 

www.telecorder.com

  

 
Distributed in USA by: 
Omnicron Electronics 
581 Liberty Highway 
Putnam, CT   06260 
 
E-Mail: 

[email protected]

  

Web:    

www.omnicronelectronics.com

 

Phone: 

 

(860) 928-0377 

Fax:  

      

(860) 928-6477 

 
 
 

Summary of Contents for UC-02B
























Reviews: