7
■
Connecting to the vehicle battery
1) Connect the BLACK wire of the power supply cable to the NEGATIVE
POLE of the vehicle 12 Volt battery, and the RED wire to the POSITIVE
POLE + (be careful not to invert the + and - poles) using 2 cables of a
cross section of 1 mm2. Protect the positive pole with a 3 A fuse near
the battery terminal.
2) Connect the GREEN wire of the power supply cable to the consensus
of the vehicle ignition console (in many cases such consensus is loca-
ted on Pin 15 in the main terminal board) so that whenever the engine
is started this cable receives a po 12 V DC voltage.
If this connection is not made the HUB will not be able to send you an
alarm when the vehicle engine is started.
• Warning
The 3-way power connector
(P) must be inserted in the
POWER V DC socket.
Inserting this connector
in any other socket will
irreparably damage the
board and render the
warranty null and void
Black
Red
3A fuse
Green
