Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
CopperHead
Figure 16 - CopperHead
A) Power & Fiber Connectors
See this Page & Page 40
B) Video/Sync/Data/Control Connectors
See Page 40
CopperHead RM-FP790
Area A – Power & Fiber Connectors
The CopperHead RM-FP790 Base Station can be configured with one of
Options. The connection and practical use of each of these options is covered in Ch
connector wiring suggestions are covered in
CopperHead FS790 ProHD Transceiver System User Guide
Page 39
CopperHead RM-FP790 Base Station Back Panel
CopperHead RM-FP790 Base Station Back Panel (Powered Version)
Sync/Data/Control Connectors
C) Video Connectors
See Page 40
D) Audio/Intercom Connectors
See Page 41
790 Base Station Front Panel – Identifying Controls
Connectors
Power & Fiber Connectors (Power Module)
Base Station can be configured with one of three different Power Module
Options. The connection and practical use of each of these options is covered in Ch
covered in Appendix 1.1.
External Power Options
Internal Power with OpticalCON Connector
19) 12V DC External Power Supply input connector
(XLR 4 Pin)
20) 12V DC Input – terminal block
See Appendix 1 – Page 73 for connection details
2) For Future Use
4) OpticalCON Connector
tem User Guide –
110124V4JH
(Powered Version)
Audio/Intercom Connectors
ying Controls &
different Power Module
Options. The connection and practical use of each of these options is covered in Chapter 5. Multi-pin
Connector
12V DC External Power Supply input connector
for connection details
