Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
Relocation of the Battery Adaptor from the Camera to the KA
CopperHead FS790 ProHD Transceiver System User Guide
Page 21
he Battery Adaptor from the Camera to the KA-F790 Camera Unit
1) Place the camera on a flat surface with the
battery mount towards you
2) Remove each of the four retaining screws
indicated in the illustration
3) Be careful not to strip these screws during
this procedure as they will be needed later
4) Place the screws in a safe place where you
can get them in a few minutes
5) Carefully pull the battery mount off of the
camera and lay it wiring side up next to the
camera. Be careful not to stretch any of the
attached wires past their limit
1) Identify the Velcro cable retainer inside the body
of the camera
2) Pull the Velcro tab free and carefully pull the
internal Power Cable connection free of the
camera
tem User Guide –
110124V4JH
F790 Camera Unit
Place the camera on a flat surface with the
Remove each of the four retaining screws
Be careful not to strip these screws during
rocedure as they will be needed later
Place the screws in a safe place where you
can get them in a few minutes
Carefully pull the battery mount off of the
camera and lay it wiring side up next to the
camera. Be careful not to stretch any of the
ires past their limit
Identify the Velcro cable retainer inside the body
Pull the Velcro tab free and carefully pull the
internal Power Cable connection free of the
