Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
Installation Of The Camera Unit Mounting Plate On
CopperHead FS790 ProHD Transceiver System User Guide
Page 23
Installation Of The Camera Unit Mounting Plate On To The Camera
Identify the various features of the Camera Unit
Mounting Plate (the camera facing side of the plate
is shown in this illustration)
A) Camera plate mounting hooks (for mounting
into the Camera accessory mounting slots)
B) Connector wire cutout
C) Connector Adaptor Plate cutout
D) Video Connector Cutout
Six Mounting Plate to Camera screw holes
Four Camera Unit to Mounting Plate screw holes
1) Position the Mounting Plate so that the two
Mounting Plate hooks sit in the Camera
accessory mounting slots
2) Line up the Mounting plate with the screw holes
in the Camera (the same ones used by the
Battery Mount)
3) Make sure that the connectors and wires feed
through the (B) Connector wire cut out and are
not pinched between the Camera and the
Mounting Plate
1) When the Plate is seated properly secure it to
the Camera using the provided 4 Chrome plated
flat head screws
2) Before tightening down the Plate confirm that
the wires move freely in the Connector wire
cutout
tem User Guide –
110124V4JH
To The Camera
Identify the various features of the Camera Unit
Mounting Plate (the camera facing side of the plate
Camera plate mounting hooks (for mounting
into the Camera accessory mounting slots)
onnector Adaptor Plate cutout
Six Mounting Plate to Camera screw holes
Four Camera Unit to Mounting Plate screw holes
Position the Mounting Plate so that the two
Mounting Plate hooks sit in the Camera
up the Mounting plate with the screw holes
in the Camera (the same ones used by the
Make sure that the connectors and wires feed
through the (B) Connector wire cut out and are
not pinched between the Camera and the
he Plate is seated properly secure it to
the Camera using the provided 4 Chrome plated
Before tightening down the Plate confirm that
the wires move freely in the Connector wire
