Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
3.3.Relocation of the CopperHead
The CopperHead RM-FP790 Base Station
back or the front of the Base Station. You may order your Base Station in either configuration and it is
possible to relocate the Fiber Connector from one position to the other in the field.
Figure 11 - CopperHead
Figure 12 - CopperHead
The Fiber Connector relocation process c
15 minutes or less. You should give yourself an hour with the expectation that it will take less time.
For a complete illustrated step-by-
click on the CopperHead FS-790 Technical Notes link or
CopperHead FS790 ProHD Transceiver System User Guide
Page 27
CopperHead RM-FP790 Base Station fiber
Base Station may be configured with the fiber connector
back or the front of the Base Station. You may order your Base Station in either configuration and it is
possible to relocate the Fiber Connector from one position to the other in the field.
CopperHead RM-FP790 Base Station with Rear Mounted Fiber Connector
RM-FP790 Base Station with Front Mounted Fiber Connector
The Fiber Connector relocation process can be accomplished by a qualified Telecast Fiber technician in about
15 minutes or less. You should give yourself an hour with the expectation that it will take less time.
-step procedure please go to
http://www.telecast-
Technical Notes link or contact Telecast Fiber System support directly.
tem User Guide –
110124V4JH
fiber connector
fiber connector mounted either on the
back or the front of the Base Station. You may order your Base Station in either configuration and it is
Base Station with Rear Mounted Fiber Connector
Mounted Fiber Connector
an be accomplished by a qualified Telecast Fiber technician in about
15 minutes or less. You should give yourself an hour with the expectation that it will take less time.
-fiber.com/support
and
Telecast Fiber System support directly.
