Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
3.2.Mounting Power Wafer Unit to the
This example illustrates the use of a camera with an Anton
a configuration where the camera is powered through the Power Wafer option. The Power Wafer is powered
through a Hybrid fiber cable which is powered from the
Power Supply.
Figure 9 - Mounting the Power Wafer Unit to the
The Power Wafer is attached to the
attached in the same manner as the camera battery.
Figure 10 - Connecting the Power Wafer
CopperHead FS790 ProHD Transceiver System User Guide
Page 26
Mounting Power Wafer Unit to the CopperHead KA-F790 Camera Unit
This example illustrates the use of a camera with an Anton-Bauer battery mount system. This case illustrates
a configuration where the camera is powered through the Power Wafer option. The Power Wafer is powered
through a Hybrid fiber cable which is powered from the CopperHead FS-790 Base Station or MPS External
Mounting the Power Wafer Unit to the CopperHead FS-790 Camera Unit
is attached to the CopperHead FS-790 Camera Unit in place of the battery. It is
attached in the same manner as the camera battery.
Connecting the Power Wafer
When the Power Wafer is securely mounted
to the CopperHead FS-790
connect the supplied Power Wafer connector
cable (1) between the Power Wafer (
the Power Wafer connector on the
Unit (3)
The Power Wafer to Camera Unit cable is
supplied with the CopperHead Power
Wafer Unit
For configuration please see
Chapter 5.
tem User Guide –
110124V4JH
Camera Unit
ystem. This case illustrates
a configuration where the camera is powered through the Power Wafer option. The Power Wafer is powered
Base Station or MPS External
Camera Unit
Camera Unit in place of the battery. It is
When the Power Wafer is securely mounted
Camera Unit
connect the supplied Power Wafer connector
between the Power Wafer (2) and
the Power Wafer connector on the Camera
The Power Wafer to Camera Unit cable is
supplied with the CopperHead Power
For configuration please see
