Model CFA-24 Transparent Cable Farm Automation Switch Reference Manual Page 25 of 78
5.4.2 Instructions for Linking Extender Units to the Controller
Set/Change Static IP
It is assumed the Establish CFA Network process has been completed and, if applicable, the IP address of the Controller
unit selected. The instructions that follow are used to enter the Controller IP address in the SET STATIC IP screen
when linking Extenders to the Controller. If the CFA system has only one unit, this section does not apply.
•
Select Installation Configuration Management from the Main screen. The INSTALLATION
CONFIGURATION MANAGEMENT - SET STATIC IP screen is shown.
Set Static IP screen. The bottom field is used to enter the IP address of the Controller unit
to link an Extender unit to the Controller unit.
•
If this unit is an Extender unit, enter the Controller IP address in the
If configuring as Extender . . .
field to
link this Extender to the Controller unit.
•
Click Submit to update all fields. A confirmation screen is shown.
