Model CFA-24 Transparent Cable Farm Automation Switch Reference Manual Page 23 of 78
5.2 Steps in Installation Configuration Management Process
1.
If configuring a multi-unit CFA network, determine which CFA-24 (and related IP address) will operate in
Controller mode.
2.
Configure Coordinate Matrix of Controller (or Standalone) unit.
3.
Add Controller’s IP address to Segment and/or Channel Extenders to link them to the Controller
4.
Assign Operational Mode of remaining units including channel and/or segment range
5.
Complete Coordinate Matrix of remaining units
6.
Optionally, configure multiple Vectoring Groups (Multi-pairs) on Controller (or Standalone) unit
7.
Display/edit Network Monitoring Map on Controller.
