3. Press the receiver
Function
button for approx. 4 seconds or until relay LEDs
go off.
All registered transmitters have been erased. The receiver returns to normal
operation.
9.8 M aster reset of the receiver
This procedure will erase all settings and all relay mapping from the receiver.
NOTE: The erase function cannot be activated/deactivated in the receiver. Contact
your representative for assistance.
RISK OF UNINTENDED EQUIPMENT OPERATION
Do not perform this action when the receiver is in a session with another
transmitter. The radio communication may be interrupted or broken.
Failure to follow these instructions could result in death, serious injury,
or equipment damage.
1. Press both the
Select
and the
Function
buttons for approx. 10 seconds or
until all function LEDs go off.
2. Release both buttons.
All the function LEDs light brieftly. The receiver has been reset. The receiver
returns to normal operation.
48
IM-PN-RX107-CERT-01pre4
PRELIMINARY
