l
The receiver must be installed vertically, on a flat and rigid surface, with the
cable at the bottom.
l
Install the receiver in a location where it is easily visible.
l
Consider the wiring limitation and the radio communication limitation to
choose the receiver location.
l
Ensure no obstacle is impairing the radio communication performance
between the receiver and the transmitter.
l
The receiver must not be installed inside closed metal containers.
l
Make sure any accessories inside or on the receiver are installed before
permanently installing the receiver.
l
Test the equipment before installing the receiver permanently.
5.2 Antenna
Type of antenna equipped
R23 receivers with...
housing 1
housing 2
Internal
○
●
External
●
○
●
Standard
○
Optional
The internal antenna can operate at a distance of about 120 m but this working
distance can change depending on many factors. Depending on the application
and/or the environment, an additional external antenna can be installed on the
receivers to optimize data transmission.
5 .2 .1 EXT ERN A L A N T EN N A (O PT I O N A L )
NOTE: If the cable length required is more than 5 m, using an active antenna is
recommended.
S pec ific at ions
EXTERNAL ANTENNA 1/2-2.4G
1/2-2.4G-K1
Frequency
2405 –2480 MHz
2405 –2480 MHz
Current consumption max. 500 mA
max. 500 mA
Impedance
50 Ω
50 Ω
Radiation
Omni
IM-PN-RX107-CERT-01pre4
21
PRELIMINARY
