Chapter 5 Technical data
This chapter summarizes all the hardware properties of the APR222ac device.
5.1 General Product Features
General product features cover performance aspects and the technical prerequisites for the installation and operation
of your device. The following table summarizes these features:
General Product Features
Property
Value
Dimensions and weights:
Equipment dimensions without cable
(W x L x H)
ca. 212 x 212 x 40 mm plus 30 mm mounting kit (2x15mm).
Weight
Approx. 2,600 g.
Material
Paint-coated galvanized iron sheet.
LEDs
4 (1x Power, 1x Status, 2x WLAN).
Power consumption of the device
Max. 20 W.
Voltage supply
Integrated power supply. Galvanic isolation, 110 V DC or 24 V
DC (depending on the model) -30 % + 25 % (power supply ac-
cording to EN 50 155, except for 10 ms power interruption at full
operation).
Environmental requirements:
Ingress Protection Rating
IP 30 (Solid particle protection >2.5mm).
Storage temperature
-40 °C to +85 °C.
Room temperature
EN 50155 Class T3: -25...+70°C / +85°C 10 min.
Relative atmospheric humidity
EN 50155: annual average value <= 75 %, at 30 days per year 95
%.
Available interfaces:
WLAN
2 x radio modules for 802.11 ac, 2.4GHz or 5GHz, 2x2 MIMO.
Ethernet IEEE 802.3 LAN
10/100/1000BaseT(X) M12 (8-pin).
Available sockets:
Ethernet interface
2 x 8-pole female M12 socket.
Antenna sockets
Each radio has two female N-type antenna sockets (a total of four
antenna sockets).
ANT1 is internally connected to CH1 and ANT 2 is internally con-
nected to CH0 at radio module 1.
ANT3 is internally connected to CH1 and ANT 4 is internally con-
nected to CH0 at radio module 2.
Power supply socket
4-pole male M12 socket.
Buttons
Reset.
To ensure safe operation, APR222ac devices have a protective earth connection. The minimum cross-section of the
earth lead should be 2.5 mm². The distance between the device and the earth connection should be as short as pos-
sible.
5 Technical data
Teldat SA
14
APR222ac
