![background image](http://html1.mh-extra.com/html/tektronix/tla7xm/tla7xm_manual_1077603099.webp)
Mainframe Removal and Installation Procedures
6- 12
TLA721 Benchtop & TLA7XM Expansion Mainframe Service Manual
Power Supply
To remove the power supply from the mainframe, perform
Removing the Blower
Assembly
procedure on page 6--7 and then complete the following steps:
1.
Using the handle on the power supply, firmly pull out the power supply form
the rear of the mainframe.
2.
Remove the two 3/32 hex drive screws and washers to remove the handle
from the power supply.
Power supply
Handle
Mainframe
Figure 6- 6: Removing the power supply
Complete the following steps to reinstall the power supply in the mainframe:
1.
Reinstall the handle to the power supply if you removed it earlier.
2.
Slide the power supply into the mainframe.
3.
Push the power supply handle in firmly to ensure that the connectors are
completely seated into the back plane connectors.
4.
Reinstall the blower assembly.
Removal
Installation
Summary of Contents for TLA7XM
