TLA721 Benchtop & TLA7XM Expansion Mainframe Service Manual
2- 1
Operating Information
This chapter contains high-level information about operating the TLA721
Benchtop Mainframe and the TLA7XM Expansion Mainframe. It also provides
information on the controls and connectors on the instrument. The last part of the
chapter contains information on SCPI commands that you can use to service the
mainframe from a remote host.
Installation
Complete installation procedures are described in the
Tektronix Logic Analyzer
Family User Manual
; refer to that manual for detailed installation instructions.
Install any modules that are required for your application before applying power
to the instrument.
If you are operating the instrument on a bench (without a rackmount) ensure a
two-inch (5.1 cm.) clearance around the instrument for proper cooling.
CAUTION.
Connect the keyboard, mouse, and other accessories before applying
power to the instrument.
Connecting accessories after applying power to the instrument can damage the
instrument or the accessories.
The mainframe comes standard with two power cords and three fuses. Before
installing the instrument you must determine the correct fuse and power cord for
your application. If you are uncertain of the power requirements of the instru-
ment, refer to
Power Cord and Line Fuse Requirements for the Benchtop and
Expansion Mainframes
in the
Tektronix Logic Analyzer Family User Manual
.
This information is important to avoid overloading the power distribution system
and to comply with the National Electrical Code.
For card cage loads in the nonshaded region of Figure 2--1, use the power cord
with the 15 A plug (Tektronix part number 161-0213-XX) or the power cord
with the 20 A plug (Tektronix part number 161-0218-XX). For high card cage
loads combined with low input line voltages (shaded region), use only the power
cord with the 20 A plug.
Selecting the Correct
Power Cord and Fuse
Summary of Contents for TLA7XM
