Maintenance
TLA721 Benchtop & TLA7XM Expansion Mainframe Service Manual
6- 3
Table 6- 1: External inspection check list
Item
Inspect for
Repair action
Front panel and side
cover
Cracks, scratches, deformations,
missing or damaged retainer
screws, or ejector handles.
Replace defective or missing
parts.
Front panel connectors Broken shells, cracked insulation,
and deformed contacts. Dirt in
connectors.
Replace defective parts. Clear dirt
out of connectors.
Rear connectors
Cracked or broken shells, dam-
aged or missing contacts. Dirt in
connectors.
Replace defective parts. Clear dirt
out of connectors.
Accessories
Missing items or parts of items,
bent pins, broken or frayed
cables, and damaged connectors.
Replace damaged or missing
parts, frayed cables.
CAUTION.
To prevent damage to electrical components from moisture during
external cleaning, use only enough liquid to dampen the cloth or applicator.
Clean the exterior surfaces with a soft dry lint-free cloth, or a soft-bristle brush.
If any dirt remains, use a soft cloth or swab dipped in a 75% isopropyl alcohol
solution. Use a swab to clean narrow spaces around controls and connectors. Do
not use abrasive cleaning compounds.
CAUTION.
Avoid getting moisture inside the instrument during exterior cleaning;
use just enough moisture to dampen the cloth or swab.
Use only deionized water when cleaning. Use a 75% isopropyl alcohol solution
as a cleanser and rinse with deionized or distilled water.
Do not use chemical cleaning agents; they may damage the chassis. Avoid
chemicals that contain benzene, toluene, xylene, acetone, or similar solvents.
Remove the module covers to access the inside of the benchtop controller or the
expansion module for inspection and cleaning. Refer to the
Removal and
Installation Procedures
for detailed information on cover removal. Inspect the
internal portions of the modules and the mainframes for damage and wear using
Table 6--2 as a guide. Defects found should be repaired immediately.
Exterior Cleaning
Procedure
Interior Inspection
Summary of Contents for TLA7XM
