Tektronix TLA7XM, Manual, Page: 80 / 190

Performance Verification Procedures
TLA721 Benchtop & TLA7XM Expansion Mainframe Service Manual
4- 5
5.
Select All Modules, All Tests, and then click the Run button on the property
sheet.
All tests that displayed an “Unknown” status will change to a Pass or Fail
status depending on the outcome of the tests.
6.
Scroll through the tests and verify that all tests pass.
The TLA Mainframe Diagnostics are a comprehensive software test that checks
the functionality of the mainframes. To run these diagnostics, do the following
steps:
1.
Quit the logic analyzer application.
2.
Click the Windows Start button.
3.
Select Programs
→
Tektronix Logic Analyzer
→
TLA Mainframe Diagnos-
tics.
4.
Run the mainframe diagnostics.
CheckIt Utilities is a comprehensive software application used to check and
verify the operation of the PC hardware in the portable mainframe. To run the
software, you must have either a keyboard, mouse, or other pointing device.
NOTE
. To check the floppy disk drive or the CD-ROM drive, you must have a test
floppy disk or CD installed before starting the CheckIt Utilities.
To run CheckIt Utilities, follow these instructions:
1.
Quit the logic analyzer application.
2.
Click the Windows Start button.
3.
Select Programs
→
CheckIt Utilities.
4.
Run the tests. If necessary, refer to the CheckIt Utilities online help for
information on running the software and the individual tests.
Certification
The system clock of the controller is checked for accuracy. The instrument is
certifiable if this parameter meets specifications. This procedure is described
under
Checking the 10 MHz System Clock (CLK10) on page 4--8. Record the
results in a copy of the Calibration Data Report at the end of this chapter.
TLA Mainframe
Diagnostics
CheckIt Utilities
Benchtop Mainframe