Tektronix TCP0030A, Instruction Manual, Page: 74 / 92

Performance Veri fi cation
Equipment Required
The equipment required for the performance veri fi cation procedure is listed below. (See Table 6.)
Table 6: Test equipment
Description and quantity Performance requirement Recommended example 1
Oscilloscope TekVPI interface, 500 MHz or greater bandwidth Tektronix DPO4000
High amplitude pulse generator Risetime <500 ps, pulse width >100 ns, amplitude
>10 Vpp into 50
Ω
Picosecond Labs 2600C
Calibrator DCV: 0.2% accuracy, 0 to ±1.5 V, square wave output
ACA: 0.25% accuracy, 0 to ±6 A, square wave output Fluke 9100
DMM ≥ 2 volt range, ≥ 1% accuracy Keithley 2700
TekVPI Calibration/Veri fi cation
adapter
TekVPI interface 067-1701-xx (See page 42.)
DC current loop 5 turns 18 AWG coated wire on 3 inch form See instructions that follow
HF current loop 50 Ω ±0.5%, BNC male 067-2396-xx
Adapter BNC-to-dual banana 103-0090-xx
Adapter SMA male-to-BNC female 015-1018-xx
BNC cable 50 Ω , 0.76 m (30 in) length 012-0117-xx
Test leads (2)
Banana plug to clip leads Keithley 1681
1
Nine-digit part numbers (xxx-xxxx-xx) are Tektronix part numbers.
54 TCP0030A Current Probe Instruction Manual