Tektronix RTX100B, Service Manual

Page: 35 / 178

Specifications
RTX100B ISDB-T RF Signal Generator Service Manual
1-13
Table 1-4: Environmental characteristics (Cont.)
Characteristics Description
Installation requirements
Power dissipation 100 W maximum. Maximum line current is 1.3 A
rms
at 50 Hz
Surge current
≦
12 A peak for less than 5 line cycles at 25
_
C after product has been off for at least 30
seconds
Cooling clearance
Top clearance 5 cm (2 in)
Side clearance 5 cm (2 in)
Rear clearance 5 cm (2 in) from the fan guard
Certifications and Compliances
Table 1-5: Certifications and compliances
Category Standards or description
EC Declaration of Conformity Meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EMC Directive 89/336/EEC:
EN 55011 EMC requirement for Class A electrical equipment for
measurement, control and laboratory use
EN 61000-3-2 AC Power Line Harmonic Emissions
IEC 61000-4-2 Electrostatic Discharge Immunity (Performance Criterion B)
IEC 61000-4-3 RF Electromagnetic Field Immunity (Performance Criterion A)
IEC 61000-4-4 Electrical Fast Transient / Burst Immunity (Performance Criterion B)
IEC 61000-4-5 Power Line Surge Immunity (Performance Criterion B)
IEC 61000-4-6 Conducted RF Immunity (Performance Criterion A)
IEC 61000-4-11 Voltage Dips and Interruptions Immunity (Performance Criterion B)
Low Voltage Directive 73/23/EEC: Amended by 93/68/EEC:
EN 61010-1: 2001 Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use
Australia/New Zealand Declaration
of Conformity -- EMC
Complies with EMC provision of Radio Communications Act per the following standard(s):
AS/NZS 2064.1/2
Industrial, Scientific, and Medical Equipment: 1992