Tektronix RTX100B, Service Manual

Page: 150 / 178

Using the Rescue Disc
5-48
RTX100B ISDB-T RF Signal Generator Service Manual
2. Connect the external USB DVD drive to port 1 and the USB keyboard to
port 2 of the instrument, and then restart.
After the BIOS screens, the CD boots and scans for the USB drive. A screen
is displayed within a short period prompting you to press 1 to continue and 2
to abort the procedure and turn off the instrument. By default, option 2 is
selected after a delay of 20 seconds.
3. Press 1 to proceed as soon as you see the screen.
NOTE
. The approximate time taken to restore the Windows XP and RTX100B
application is 1 hr to 1.5 hr.
4.
Press any key to turn off the instrument once the restoration is complete.
5.
Disconnect the external USB DVD drive from the instrument and restart.
Phoenix Recover Pro 6 screen is displayed with Recover Boot Partition and
Recover Entire Drive options.
6.
Click
Recover Entire Drive
to overwrite the entire data. A confirmation
dialog box is displayed. Click Yes to continue.
A recovery progress screen is displayed with the details of the time elapsed,
time remaining, amount of data recovered, and total data to recover. The
approximate time taken for the process is 1.5 hr.
CAUTION .
Do not Cancel the recovery process once initiated. Cancelling the
process will leave your hard disk drive in a partially recovered unstable state.
Immediately after the data is recovered, the instrument restarts and the
Windows XP setup wizard is displayed.
7. Click the Next button of the wizard until Windows XP is installed. The
instrument restarts after the installation of Windows XP to display the
RTX100B application screen.
NOTE
. On B020000 and above, the Application software (V10.1 and above) and
the test streams will have to be reinstalled after the Operating System recovery.