Tektronix RTX100B, Service Manual

Page: 23 / 178

RTX100B ISDB-T RF Signal Generator Service Manual
1-1
Product Overview
The RTX100B ISDB-T RF Signal Generator converts a broadcast transport
stream into an RF signal and outputs it. In addition to the RF signal output
feature, the RTX100B records and plays MPEG-2 transport streams that are
compliant with ATSC, DVB, and ARIB standards.
The RTX100B provides the following features:
H
RF modulated output of broadcast transport streams
UHF: 13 channel to 62 channel (473 MHz to 767 MHz)
H
Direct RF output of ASI input signals
H
Data rate: 200 Mbps maximum (RAM mode); 256 Kbps minimum
H
Hierarchy display of stored or captured transport streams
H
188, 204, 208 bytes packet size, S-TMCC, M-TMCC, non transport stream,
and partial transport stream output formats
H
Real--time updating of stream parameters; continuity_counter, PCR/PTS/
DTS, TOT/TDT/STT, NPT, and Reed Solomon (ISDB-T only)
H
Continuous recording of captured streams
H
PCR jitter insertion
H
Triggered stream capture
H
Full remote control using Ethernet interface
H
Scheduler application for automated stream playout and record (Option SC
only)
H
Playout on one interface at a time, either IP or ISDBT/ASI interfaces
H
Two IP versions namely IPv4 and IPv6 are supported
H
Stream replication (IP) with some attributes of the stream incremented by a
certain value
The RTX100B includes the ReMux application software that provides the
capability to create a transport stream of super frame structure defined in the
ISDB-S systems from an MPEG2 transport stream.