Tektronix RTX100B, Service Manual

Page: 135 / 178

RTX100B ISDB-T RF Signal Generator Service Manual
5-33
Verifying the BIOS Configuration
This section provides information needed to verify or set the BIOS configura-
tion.
Procedure
CAUTION .
It is very important to follow this procedure exactly or the instrument
will not operate correctly.
Perform the following procedure to set the BIOS configuration:
1. Connect the USB keyboard to the USB connector on the front panel.
2. Power on the instrument, and then press the Del key immediately.
The
AwardBIOS CMOS Setup Utility screen
appears.
3. Set the BIOS configuration as follows. Use the arrow keys to highlight each
item, and then press the
Enter
key to select it.
Under Standard CMOS Features
Drive A :
None
Advanced Bios Features
First Boot Device : HDD-0
Second Boot Device :
USB-CDROM
Third Boot Device : USB-HDD
Advanced Chipset Features
Boot Display : CRT+LFP
Panel Number : 1024X768
Integrated Peripherals
Super IO Device : Onboard FDC Controller : Disabled
Onboard Serial Port 2 : Disabled
Onboard Serial Port 4 :
Disabled
PC Health Status
CPU Warning Temperature :
Disabled
Shutdown Temperature : Disabled