Tektronix RTX100B, Service Manual

Page: 149 / 178

RTX100B ISDB-T RF Signal Generator Service Manual
5-47
Using the Rescue Disk
The information in this section helps you to reinstall the Microsoft Windows XP
and the RTX100B application software using the rescue DVD disks.
The prerequisites for the recovery procedure are as follows:
H
RTX100B series instrument
H
Sony DRX--810UL external USB DVD drive
H
Rescue DVD disk, Tektronix part number 063-3931-XX
H
USB keyboard
H
USB mouse
Recovery Procedure
NOTE
. The rescue disk recovery procedure works only with MTX100B, RTX100B,
and RTX130B instruments.
Before you start the rescue disk recovery procedure make sure to check for the
BIOS settings. Follow these steps to set the BIOS settings for booting from an
external USB DVD drive:
1. Press Del when the initial BIOS screen appears.
2. Select Advanced CMOS Feature and set it to the following configuration:
First Boot Device=(USB_CDROM)
Second Boot Device=(USB_HDD)
Third Boot Device=(HDD_0)
3.
Press
F10
to save the CMOS configuration.
A message asking you to press Y to exit and N to continue is displayed.
4. Press Y to exit and restart the instrument.
Follow these steps to restore the Windows XP and RTX100B application
software using the rescue disks:
1.
Insert the rescue disk 1 (MTXRTX_10_1_DSK1.iso) into the external USB
DVD drive.