Tektronix RTX100B, Service Manual

Page: 111 / 178

Removal and Installation Procedures
RTX100B ISDB-T RF Signal Generator Service Manual
5-9
Required Equipment.
Most modules in this RTX100B can be removed with a
screwdriver handle mounted with a size T-10 Torx screwdriver tip. Use this tool
whenever a procedure step instructs you to remove or install a screw unless a
different size screwdriver is specified in that step.
All equipment required to
remove and reinstall each module is listed in the first step of its procedure.
Table 5-4: Tools required for module removal
Item
No. Name Description
1 Screwdriver handle Accepts Torx
r
-driver bits
2 T-10 Torx
r
tip Torx
r
-driver bit for T-10 size screw heads
3 T-15 Torx
r
tip Torx
r
-driver bit for T-15 size screw heads
4 Nut driver,
1
/
4
inch Standard tool