Tektronix RFA300A, User Manual

Page: 22 / 112

Installation
1- 8
REV SEP 1994
RFA300A Measurement Set 8VSB
Bar
Nut
10-32 PNH screw
Extension bracket
Stationary track
Use this measurement
Method A Method B
Use this measurement
Extension bracket
Stationary track
Rear rail
Rear rail
NOTE: Right-hand and left-hand stationary sections are designated by the
RH and the LH marked on the rails. Stop latch holes should be towards
the bottom when slides are in place. (The right hand rail is shown above.)
Automatic latch Automatic latch
Stop latch
hole
Figure 1- 3: Attaching the extension brackets to the stationary tracks
Adjacent equipment
1.75 in.
0.500 in.
Figure 1- 4: Mounting hole selection on the front rails of the equipment rack