Tektronix RFA300A, User Manual

Page: 78 / 112

Appendix A: Specifications
A- 16
RFA300A Measurement Set 8VSB
Certifications and Compliances
Table A- 10: Certifications and compliances
Category Standards or description
EC Declaration of Conformity --
EMC Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated using:
EN 61326: 1997 Product Family Standard for Electrical Equipment for Measurement, Control, and
Laboratory Use--EMC Requirements.
1
Emissions:
EN 61326 Class A Radiated and Conducted Emissions
IEC 61000--3--2 Conducted Power Line Harmonic Currents
Immunity:
IEC 61000-4-2 Electrostatic Discharge
2
IEC 61000-4-3 Radiated RF Electromagnetic Field
2,4
IEC 61000-4-4 Electrical Fast Transient/Burst
3
IEC 61000-4-5 Surge
2
IEC 61000-4-6 Conducted RF
2,4
IEC 61000-4-8 Power Frequency Magnetic Field
2
IEC 61000-4-11 Power line Fluctuation
3
FCC Compliance Emissions comply with FCC Code of Federal Regulations 47, Part 15, Subpart B, Class A Limits.
1
EC Declaration of Conformity --
Low Voltage Compliance was demonstrated to the following specification as listed in the Official Journal of the
European Union:
Low Voltage Directive 73/23/EEC, amended by 93/69/EEC
EN 61010-1:1993 Safety requirements for electrical equipment for measurement
control and laboratory use.
U.S. Nationally Recognized
Testing Laboratory Listing ANSI/ISA S82.01:1994 Safety standard for electrical and electronic test, measuring,
controlling, and related equipment.
Canadian Certification CAN/CSA C22.2 No. 1010.1 Safety requirements for electrical equipment for measurement,
control, and laboratory use.
Additional Compliance UL3111-1 Standard for electrical measuring and test equipment.
IEC61010-1 Safety requirements for electrical equipment for measurement,
control, and laboratory use.
1 Compliance demonstrated using high-quality shielded interface cables.
2 EN 61326 Immunity Test requirement for Industrial Location intended use.
3 EN 61326 Minimum Immunity Test requirement.
4 Performance Criteria: Signal/Noise Ratio greater than or equal to 38 dB.