Tektronix RFA300A, User Manual

Page: 27 / 112

Installation
RFA300A Measurement Set 8VSB
1- 13
Creating a Startup Disk
An RFA300A Windows NT Start Up disk is shipped with the instrument. Use
this disk to restart your measurement set in case of a major hardware or software
failure. This section creates an extra startup disk in case the original becomes
corrupted.
All software is installed at the factory. If you ever need to reinstall, refer to
Appendix C: Software Installation.
NOTE
. You cannot reinstall software without a startup disk.
To create a startup disk, do the following:
1. Open My Computer/Control Panel , and double-click on Add/Remove
Programs .
2.
Select the
Startup Disk
tab.
3. Click the Create Disk button and follow instructions.
4. Copy the following files to the startup disk:
H
C:REALMODE\MSCDEX.EXE
H
C:REALMODE\TEAC_CDI.SYS
H
C:WINDOWS\COMMAND\XCOPY.EXE
H
C:WINDOWS\COMMAND\XCOPY32.EXE
5.
Create a file named AUTOEXEC.BAT in the startup disk. Add the line
MSCDEX.EXE /D:TEAC--CDI/L:D to the file.
6. Open the CONFIG.SYS file in the startup disk and add
DEVICE=TEAC_CDLSYS /D:TEAC--CDI to the end file.