Tektronix Phaser 850 User Manual Download Page 138

Page: 138 / 167

138

Phaser 850 Color Printer

Cleaning Phaser 850 Printers

To clean the bottom of the media-pick roller:

Use a prepackaged alcohol-soaked wipe, or use a lint-free cloth with 90-percent
isopropyl alcohol.

To access the pick roller, reach into the media tray slot.

Scrub the bottom surface of the pick roller thoroughly

Replace the upper media tray in the printer.

Cleaning the separator pad

Remove the upper media tray from the printer.

Gently wipe the separator pad using an alcohol-soaked cloth.

Inspect the separator pad for damage to the metal edge; it should be free of dents and
lie flat against the rubber surface. If any damage is seen, the separator pad should be
replaced (part number: 116-0838-00).

Replace the upper media tray in the printer.

9103-21

9103-63

Summary of Contents for Phaser 850








































































































































































Search results

Summary of Contents for Phaser 850

Reviews:

Related manuals for Phaser 850

Brands by name

Popular brands

Tektronix Phaser 850, User Manual

Search results

Summary of Contents for Phaser 850

Reviews:

Related manuals for Phaser 850

Brands by name

Popular brands