Operating basics
Figure 9: Install the adapter holder by gluing it to the circuit board
3.
Install the lead set and the adapter in the holder.
Install the hand browser
Use the hand browser to temporarily connect to signals of interest on the SUT.
1.
Insert the lead set into the hand browser. (See Figure 10.)
Figure 10: Insert the lead set into the hand browser
2.
Position the probe tips as needed to connect to the signal of interest on the
SUT.
The probe tips swivel 360°.
14
P6910 General Purpose Probe Instruction Manual
Summary of Contents for P6910
