Tektronix P6910, Instruction Manual

Page: 25 / 48

Operating basics
The following fi gure shows the individual contents of the accessory kit.
Figure 5: Option 2K accessory kit contents
Install the standard adapter
Use the general purpose standard adapters for soldering to the component pins or
vias on the SUT.
Install adapters on the PCB as needed to connect the probe to the SUT.
1. Locate the standard adapter in the accessory kit and trim the length according
to your needs.
2. Trim the wire tubing to the desired length and slide it over the adapter leads.
(See Figure 6 on page 11.)
Figure 6: Installing the standard adapter on the PCB
P6910 General Purpose Probe Instruction Manual 11