Tektronix P6910, Instruction Manual

Page: 29 / 48

Operating basics
Install the probe grouper
(Option 1K and 2K)
Use the probe grouper to group lead sets together for connections to adjacent
pins on the SUT.
1. Connect the lead sets to the header. (See Figure 11.)
The header temporarily holds the lead sets in place while you install the
grouper.
Figure 11: Use the grouper to hold the lead sets together
2. Place the grouper around the lead sets and close it in place.
3. Remove the header from the lead sets.
4. Connect the assembly to the SUT.
Note the insertion force and clearance guidelines when connecting the probe
to the SUT. (See Figure 12 on page 16.)
P6910 General Purpose Probe Instruction Manual 15