Tektronix P6910, Instruction Manual

Page: 15 / 48

Operating basics
This section provides a brief description of the Tektronix P6910 General Purpose
Logic Analyzer Probe, probe accessories, probe labels, and probe accessory
connection instructions.
Product description
The P6910 probe is a 34-channel, general purpose probe that provides connections
from a Tektronix logic analyzer to the SUT (system-under-test).
The following list details the capabilities and qualities of the P6910 probe:
34 individual active channel connections
Differential and single-ended data, clock and quali fi cation inputs
Lead set support for both single-ended and differential applications
Holder for 8-channel applications
Color-coded signal connectors
–2.5 V to +5 V input operating range
Minimal loading of <1 pF and 20 k Ω to ground
Operation in normal or inverted polarity is acceptable
Any common mode voltage is acceptable as long as the maximum positive
voltage does not 5 V and the maximum negative voltage does not
exceed –2.5 V
P6910 probe accessory information
The P6910 probe includes accessories to connect the logic analyzer to the SUT.
The following accessories are available for the P6910 probe:
Option 1K provides accessories for probing applications for less than
100 MHz. Tektronix recommends ordering two of each of the accessories
for a 34-channel probe. Details on the accessories are provided later in this
document. (See page 9,
Option 1K accessories .)
Option 2K provides a probe accessory kit (Tektronix part number,
020-2973-01 or higher) for high-performance probing applications; provides
different means to connect the logic analyzer to the SUT. Tektronix
recommends ordering two accessory kits for a 34-channel probe. Details on
the accessory kit contents are provided later in this document. (See page 10,
Option 2K accessories .)
P6910 General Purpose Probe Instruction Manual 1