Tektronix P6910, Instruction Manual

Page: 24 / 48

Operating basics
Option 2K accessories
Option 2K provides probe accessories with different means to connect the P6910
probe to the SUT.
Determine which method meets your particular needs. For some cases, you may
need to either glue or solder the adapters to the SUT before connecting the probe.
Not all of the accessories in the kit are needed for use with this probe.
The accessory kit is identical to the one used with the P6780 MSO probe. Either
the P6780 or P6910 probes can connect to any of the accessories in the kit. The
accessories enable users to share accessories between either probe as well as
switching between logic analyzer and oscilloscope probing applications.
The following table describes the contents of the accessory kit.
Item Quantity
Tektronix part
number
Standard Adapter Kit of 17 ea 020-3035-01
Wire Tubing Kit of 34 ea 020-3037-01
Ferrite Bead Kit of 17 ea 020-3034-01
Wide Body Adapter Kit of 17 ea 020-3036-01
Flex Adapter Kit of 17 ea 020-3033-01
Insulated Wire 15 ft. (4.57 m) 020-3021-00
25°/55° Holder Kit of 17 ea 020-3032-01
Lead set Ground Kit of 2 ea 020-3038-00
Hand Browser Kit of 2 ea 020-3031-00
Probe Grouper
Header, 2 X 8 pin 2 ea
1 ea 020-3042-00
10 P6910 General Purpose Probe Instruction Manual