Tektronix P5100A, Technical Reference

Page: 17 / 27

P5100A Adjustments
P5100A Adjustments
To gain access to the adjustments, you must disassemble the probe compensation box as described below.
1. Using a razor knife, cut in half the two labels on the sides of the compensation box, along the top and bottom cover
seams. Be careful to not damage the labels; they must remain intact and on the probe due to regulatory requirements.
Figure 3: Cut the two side labels in half
2. Separate the covers by inserting a thin fl at-blade screwdriver into the one of the slots on the side of the compensation
box. The slots are hidden beneath the labels.
Figure 4: Separate the covers
P5100A & P5150 High Voltage Probes Technical Reference 5