Remote Commands
MTX100A MPEG Recorder & Player User Manual
3-101
Command Description
:RECord:ACQuire:STARt
Starts input stream acquisition. When two or more record commands are
sent to the instrument successively, the instrument stops stream acquisition
and then starts stream acquisition for each command. Therefore, when
many commands are sent to the instrument, it takes a long time to complete
all settings. If you send the :RECord:ACQuire:STOP command before
sending record commands and send the :RECord:ACQuire:STARt
command after sending record commands, you can shorten the setting
time.
:RECord:ACQuire:STOP
Stops input stream acquisition. Refer to the :RECord:ACQuire:STARt
command description on how to use this command.
:RECord:CLOCk:RATE?
Returns the clock rate of the input stream in MHz.
:RECord:EXTernal RISE|FALL|OFF
Sets whether to start input stream record using a trigger signal applied to
the Trig In/Out connector. The choices are RISE, FALL, and OFF. When
you select RISE, the input stream record is started at the rising edge of the
applied trigger signal. When you select FALL, the input stream record is
started at the falling edge of the applied trigger signal. The default value is
OFF.
:RECord:EXTernal?
Returns whether to start input stream record using a trigger signal applied
to the Trig In/Out connector.
:RECord:PACKet?
Returns the packet size of the input stream. The available responses are
188, 204, 208, or NONTs. When the :RECord:I1394I:PARTialts
command is set to ON, the response is 192.
:RECord:SOURce SPI|ASI|UNIVersal||I1394I|S310M|STANdard|OPTion
Sets the interface used to capture a stream data. The choices are SPI, ASI,
UNIVersal, I1394I (IEEE1394), S310M (SMPTE310M), STANdard
(same as SPI), and OPTion (optional interface currently installed). The
default value is SPI.
Summary of Contents for MTX100A
