manualshive.com logo in svg

Tektronix MTX100A, User Manual

Share
Download
Tektronix MTX100A User Manual Download Page 234

Appendix C: Using the Scheduler Application (Option SC Only)

C-4

MTX100A MPEG Recorder & Player User Manual

Status/Control Panel

The status/control panel appears when you select the Execute command from the 
Schedule menu or click the Execute button on the toolbar. This panel allows you 
to set properties for the whole schedule list, and start/stop stream playout or record. 
Refer to 

Status/Control Panel

 on page C-15 for detailed information. 

Schedule List

Lists the streams currently included in the schedule. The schedule list is composed 
of the following items: 

„

Schedule icon:

 The following icons are displayed in front of the file name:

These icons change depending on the Start Time option setting in the Play 
Properties or Record Properties dialog box. Refer to 

Play Properties Dialog 

Box

 on page C-10 and 

Record Properties Dialog Box

 on page C-14.

„

Filename:

 Shows the file name of the stream.

„

Packets:

 Shows the number of packets contained in the stream (For a Non TS 

stream, it shows the number of bytes). This item does not appear in the 
schedule record mode.

„

Start time:

 Shows the start date/time for the stream.

„

End time:

 Shows the end date/time for the stream. 

„

Duration:

 Shows the duration time of the stream.

Streams can be selected by clicking the stream name. Only one stream can be 
selected at a time.

When you start playing or recording streams, the background of the schedule list 
changes to gray, and the stream currently being played or recorded is highlighted.

Status Bar

The status bar displays a short explanation of the currently selected command and 
information related to the operation. You can toggle the status bar display on and 
off using the Status Bar command in the View pull-down menu.

This icon shows that no start time or triggered start  has been specified for the stream.

This icon shows that the start time has been specified for the stream.

This icon shows that a triggered start has been specified for the stream.

Summary of Contents for MTX100A























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands