Tektronix MTX100A, User Manual

Page: 86 / 278

Using the Menus
3-26
MTX100A MPEG Recorder & Player User Manual
Menus in the Record Screen
This subsection describes the menus available in the Record screen.
File Menu The File menu in the Record screen contains commands for setting the save mode
and for saving and loading a preset file. This menu also contains commands for
exiting the MTX100A application and for shutdown of the instrument. Table 3-9
describes the commands in the File menu.
View Menu The View menu contains commands that control the display of the Toolbar and
Status bar. The View menu in the Record screen is the same as that in the Play
screen. Refer to Table 3-2 on page 3-5 for the commands available in the View
menu.
Table 3-9: File menu commands (Record screen)
Command Description
Save Specifies the file name used when you save stream data. When you
select this command, the Save as dialog box appears. By default, the
current data (yymmdd) is used as a file name.
Save Mode Sets the save mode when you save stream data. You can select Over
Write or New File. In the Over Write mode, the existing file is overwritten
by the new file with the name specified in the Save command whenever
you save a stream data. In the New File mode, a new file is created
whenever you save a stream file. The file name is the following: the name
specified by the Save co # (1,2,3,4...).
Load Preset Loads the specified preset file (*.set). When a preset file is loaded, the
current instrument settings are changed by the file's content. Refer to
Preset File beginning on page 3-63 for more information about the preset
file.
Save Preset Saves the current instrument settings as a preset file. Refer to Preset File
beginning on page 3-63 for more information about the preset file.
PLAY Switches to the Play screen.
Minimize Minimizes the MTX100A application window.
Exit Quits the MTX100A application. The MTX100A application settings are
saved.
Shutdown Quits the MTX100A application and shuts down the MTX100A.