Model 4200A-SCS Source-Measure Unit (SMU) User's Manual
Section 3: Setting up SMUs in Clarius
4200A-SMU-900-01 Rev. A December 2020
3-7
To set up test parameters:
1. In the project tree, select the test.
2. Select
Configure
.
3. Select
Test Settings
in the right pane.
Figure 33: Test Settings for a SMU test
4. Adjust settings as needed.
5. If needed, select
Advanced
to access additional settings.
For descriptions of the test options, refer to
(on page 3-27).
