Model 4200A-SCS Source-Measure Unit (SMU) User's Manual
Section 3: Setting up SMUs in Clarius
4200A-SMU-900-01 Rev. A December 2020
3-5
Set the key parameters
The Key Parameters are the most commonly used parameters for a terminal.
To set the Key Parameters:
1. Select the field that you want to change.
2. If there is a:
▪
Down arrow to the right of the field:
Select a value from the list.
▪
Field:
Type the value. Error messages are displayed if you type an out-of-range value.
▪
Check box:
Select or clear the check box to enable or disable an option.
Figure 31: Clarius selection options
3. Select
Save
.
Additional terminal settings are available from the right pane Terminal Settings tab, shown in the
following figure. Refer to
(on page 3-16) for descriptions of the options.
