Section 3: Setting up SMUs in Clarius
Model 4200A-SCS Source-Measure Unit (SMU) User's Manual
3-2
4200A-SMU-900-01 Rev. A December 2020
To set up a test of BJTs:
1. Select
Save
to save your existing project.
2. Choose
Select
.
3. Select the
Projects
tab.
4. In the Filters pane, select
Transistor
.
5. In the Search box, type
BJT
and select
Search
. The Project Library displays projects that are
intended for BJT transistor testing.
6. Select
Create
for the project you want to open. The project replaces the previous project in the
project tree.
Figure 28: Filter and search for the bjt project
Add a device and test to the project
You can add additional items to a project. When you add a project from the library to the project tree,
it is copied from the project in the library. Any changes you make do not affect the original project.
The new project in the project tree is automatically stored in Projects.
This example shows you how to add a predefined test to the project. Predefined tests are configured
with commonly used parameter settings and a set of typical data. Once they are in a project, you can
change the parameters as needed. They can be an efficient way for you to add a test to your project.
You can use the basic procedure described here to find any items in the library.
