Section 3: Setting up SMUs in Clarius
Model 4200A-SCS Source-Measure Unit (SMU) User's Manual
3-6
4200A-SMU-900-01 Rev. A December 2020
Figure 32: Terminal Settings tab and Terminal Settings Advanced dialog box
Set the test parameters
In the Test Settings pane, you can set items such as:
•
Test speed.
•
Timestamp reporting.
•
Delays.
•
Hold times.
•
In-test and post-
test data computations using the Formulator. Refer to “Formulator” in the
Model
4200A-SCS Clarius User's Manual
for detail on using the Formulator.
•
Compliance exit condition.
You can configure multiple measurement delays on the Test Settings tab. However, if you are using
autoranging, these delays do not include autoranging delays, which can be substantial.
