Tektronix IsoVu TIVM Series, User Manual

Page: 75 / 82

Appendix A: Remote programming
CH<n>:PRObe:PROPDELay?
Only supported by 3000/4000 Series oscilloscopes.
Returns the propagation delay value (in seconds). Query only.
CH<n>:PRObe:RECDESkew?
Only supported by 3000/4000 Seriesoscilloscopes.
Returns the recommended deskew value (in seconds). Query only.
CH<n>:PRObe:RESistance?
Returns the input resistance (in ohms). It depends on the attached sensor tip cable.
Query only.
CH<n>:PRObe:UNIts?
Returns the units of the sensor tip (always
“V”
). Query only.
CH<n>:PROBECOntrol {AUTO | MAN}
Only supported by 5000/7000/70000 Series oscilloscopes.
The command sets the Auto or Manual sensor tip range control.
CH<n>:PROBE:PROBECOntrol?. The query returns the keyword AUTO or
MANUAL.
CH<n>:PROBEFunc:EXTAtten <NR3>
Only supported by 5000/7000/70000 Series oscilloscopes.
The command sets user-de fi ned external attenuation factor.
CH<n>:PROBEFunc:EXTAtten?. The query returns the external attenuation
factor.
CH<n>:PROBEFunc:EXTDBatten?
Only supported by 5000/7000/70000 Series oscilloscopes.
Returns the external attenuation factor expressed in dB. Query only.
TIVM Series Measurement System User Manual 57