Tektronix IsoVu TIVM Series, User Manual

Page: 21 / 82

Operating information
Environmental
requirements
The following tables describe speci fi cations and maximum operating
environmental ratings for the measurement system when connected to a DUT
and a Tektronix oscilloscope.
Table 3: Input speci fi cations
Feature Description
1000 V
rms
, CAT II Common mode
2000 V peak, CAT I (expected transient voltage 2500 V peak)
Differential mode Sensor tip cable dependent (See the Sensor tip cable voltage
rating below.)
Table 4: Environmental considerations
Feature Description
Temperature
Controller
Operating 0 °C to 40 °C (32 °F to 104 °F)
Non-operating -40 °C to 70 °C (-40 °F to 158 °F)
Sensor head
Operating 0 °C to 70 °C (32 °F to 158 °F)
Non-operating -40 °C to 70 °C (-40 °F to 158 °F)
Sensor tip cables/adapters
Operating and
non-operating -40 °C to 85 °C (-40 °F to 185 °F)
Humidity
Controller
Operating 5% to 85% RH (Relative Humidity), at up to 40 °C (104 °F),
non-condensing
Non operating 5% to 85% RH (Relative Humidity), at up to 40 °C (104 °F)
5% to 45 % RH above 40 °C (104 °F) up to 70 °C (158 °F),
non-condensing
Sensor head
Operating 5% to 80% RH (Relative Humidity), at up to 40 °C (104 °F)
5% to 45 % RH above 40 °C (104 °F) up to 70 °C (158 °F),
non-condensing
Non operating 5% to 85% RH (Relative Humidity), at up to 40 °C (104 °F)
5% to 45 % RH above 40 °C (104 °F) up to 70 °C (158 °F),
non-condensing
TIVM Series Measurement System User Manual 3