Output Shaped and Unshaped Video
A-15
For the Model 4000 or Model 2200:
1.
Press the
CONFG
button on the switcher’s main menu panel,
then the
AUX BUS FORMAT>
soft button in the Configuration
menu, and the
AUX BUS SHAPING>
button in the Aux Bus
Format menu to bring up the Aux Bus Shaping menu, shown
in
2.
Set the
VIDEO/KEY FMT
selections for Aux Buses 1 through 4
(Aux 1 and 2 on the 2200) to match the characteristic
SHAPED
or
UNSHAPED
expected by the external devices connected to
those outputs. These settings control the states of the
unshapers on the Aux Bus outputs.
When the Effects Send option is not present, the
VIDEO/KEY
FMT
selections are not visible in the menu.
Figure A-13. Model 4000 and Model 2200 Aux Bus Shaping Menu (Software v5.0)
AUX BUS SHAPING MENU
config/aux bus format/aux bus shaping
LOGICAL
PHYSICAL
PHYS AUX
SELECT
VIDEO/
KEY FMT
AUX 1
AUX BUS 2
AUX BUS 3
AUX BUS 4
UNSHAPED
UNSHAPED
UNSHAPED
AUX BUS 2
AUX BUS 3
AUX BUS 4
AUX BUS 1
SHAPED
AUX BUS 1
UNSHAPED
SHAPED
Summary of Contents for Grass Valley 3000
