manualshive.com logo in svg

Tektronix Grass Valley 3000, User Manual

Share
Download
Tektronix Grass Valley 3000 User Manual Download Page 211

4-73

Frame Store Operations (Option)

Video and Key

The Frame Store function can be assigned to either a video 
channel or a key channel. Video and key channels may also be 
selected simultaneously if video and key channels are mapped to 
the same crosspoint.

Operations that can be independently set for video and key 
channels are as follows:

■

Freeze

■

Grab

■

Field Modes

■

Mask

When

 

VIDEO 1 

and

 

KEY 1

 are delegated simultaneously, the key 

channel settings are automatically aligned with the video channel 
settings.

Mask Store

Use the mask store output as a source for the mask generators. It 
may also be routed to the switcher crosspoint matrix for use as a 
primary switcher input, and to an output module for use by 
external devices. It can also used with a drawing tablet (Mask 
Draw option) to allow an operator to draw masks and alter 
existing video that has been frozen.

Summary of Contents for Grass Valley 3000





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands