manualshive.com logo in svg

Tektronix Grass Valley 3000, User Manual

Share
Download
Tektronix Grass Valley 3000 User Manual Download Page 110

3-2

Section 3 — Switcher Concepts

Clear Working Buffer

The Current Working Buffer (CWB) is an area of system memory 
that stores the current switcher state. That is, it tracks the settings 
of switch and variable control functions on the control panel, as 
well as those of many switch and control functions set in the 
menus.

When an E-MEM recall is done, the data in the recalled E-MEM 
Register is loaded into the Current Working Buffer, which sets the 
switcher parameters of all enabled levels to match those stored in 
the first keyframe of an E-MEM effect.

The GVG Factory Default of the CWB is a set of switcher 
parameters stored in memory that may be used to return the 
switcher to a known set of conditions. Some of these parameters 
may be periodically updated with software updates.

The User-Defined Default buffer is battery-backed RAM that may 
be used to store a set of parameters tailored to your requirements 
and preferences. At power-up the information in the User-
Defined Default memory is loaded into the Current Working 
Buffer, which sets the initial state of the switcher.

At any time, the User-Defined Default values may be restored to 
all enabled areas of the switcher by pressing the

 CLEAR WORK 

BUFR

 button on the E-MEM Subpanel.

The data in the User-Defined Default Buffer may also be modified 
at any time through the Configuration/User Prefs/Define 
Defaults Menu.

Summary of Contents for Grass Valley 3000





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands