manualshive.com logo in svg

Tektronix Grass Valley 3000, User Manual

Share
Download
Tektronix Grass Valley 3000 User Manual Download Page 97

2-61

Setting User Preferences

4.

Use the

 DIM PVW 

button to assign one of the Dim Preview 

modes to the selected keyer, as follows:

ALL KEYERS 

— Causes the preview of all keyers using a 

mask on that M/E or DSK to dim on the Preview monitor.

DELEG KEYER 

— Causes only the preview of the keyer 

that is currently delegated and inserting a mask on that 
M/E or DSK to dim on the Preview monitor.

OFF

 — Turns off the preview dim function so that the 

preview never dims on that M/E or DSK regardless of 
masking.

5.

Press the

 PUSH TO PVW

 button to enable/disable the push-to-

preview mode for the entire switcher. Hold down the key 
delegate button (for example

 KEY 1

 or

 KEY 2

 on the Keyer 

panel) of the appropriate keyer for 1/2 second or more to 
display the M/E look-ahead preview along with the selected 
keyer output on the switched preview monitor.

When the key delegate button is released, the preview display 
remains on for a programmed time-out period, as set by the

 

PUSH TO PREVIEW TIMEOUT 

soft knob, before reverting to its 

original state.

PUSH TO PREVIEW TIMEOUT 

— Sets how long the 

preview will remain on after you have released the key 
delegate button. The default value for the auto preview 
timeout is 3 seconds. Any adjustments to clip or gain 
resets the time-out, thus maintaining the auto preview 
mode while making clip and gain adjustments.

6.

Press the 

EXIT 

button to return to the User Preferences Menu.

Summary of Contents for Grass Valley 3000





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands