Tektronix Grass Valley 3000, User Manual

Page: 203 / 284

4-65
Keyframe Operations
Effects Editing with Get and Put
Use Get and Put to copy entire effects from one register to another.
Use
PUT
to copy the current effect into the selected register
number.
1. Recall an effect from an E-MEM register.
2. Find an empty register number to use for step 3.
3. Press
PUT
, (empty)
register #
,
ENTER
. Or
PUT, •
‘(dot’). (Puts
the current effect into the next available empty register.)
Use
GET
to copy an entire effect from another location into the
current register.
1. Select an empty register number.
2. Find a register number with an effect to use for step 3.
3. Press
GET
,
register #
,
ENTER
. Or
GET, •
‘(dot’). (Puts the current
effect into the next available empty register.)
Constant Duration Mode
Constant Duration editing changes the way keyframes are
inserted and deleted. In Constant Duration mode, adding or
deleting keyframes does not change the total effect duration. It
does modify the preceding keyframe duration to keep the total
effect duration the same.
NOTE: The total effect length can be changed by inserting keyframes
after the last keyframe, or before the first one. The first and last keyframes
cannot be deleted in this mode, as they determine the length of the effect.
When you do a Cut in Constant Duration mode, the duration of
the removed keyframe is added to the duration of the previous
keyframe. The Time Cursor remains positioned at the point of
deletion.