Installation
6.
On the side-bezel menu, if you are on a
DHCP Ethernet network and using dynamic
addressing, set DHCP to
On
. If you are using
static addressing, set it to
Off
.
Change
Instrument
Settings
Push
Change Instrument Settings
. If you
are using DHCP, note the Ethernet address
and instrument name. If you are using Static
addressing, enter the Ethernet address you
will be using.
DHCP/
BOOTP
On
| Off
Test
Connection
NOTE.
Depending on the type and speed
of network to which your DPO3000 series
oscilloscope is connected, you may not see the
DHCP/BOOTP
fi
eld update instantaneously after
pressing the DHCP/BOOTP button. It may take a
few seconds to update.
DPO3000 Series Oscilloscopes User Manual
47