Trigger Setup
Triggering on Buses
You can use your oscilloscope to trigger on CAN, LIN, I
2
C, SPI, RS-232, RS-422, RS-485, and UART buses, if you have the
appropriate DPO3AUTO, DPO3EMBD, or DPO3COMP application module installed. The oscilloscope can display both physical
layer (as analog waveforms) and protocol level information (as digital and symbolic waveforms).
To set up the bus trigger:
1.
If you have not already de
fi
ned your bus using
the front-panel
B1
and
B2
buttons, do so now.
2.
Push Trigger
Menu
.
DPO3000 Series Oscilloscopes User Manual
121
